Does your warehouse have a Paging system then all you need to do is add a simple module to get the door bell and or the clock tones.
the CTG-1 and CTG-2 clock tone controllers fill the bill
What they do is add simple tones over your new or existing paging system.
Want a door bell run a simple 2 wire circuit from door bell switch to controller then 2 wire from controller to paging input and thats it
Those same 2 wires you hooked from controller to paging amplifier also sends the shift change tones which you program into the controller with simple commands via simple schedules you can set for once to several times a day.
You can even hook the facility burglar alarm in so it sends an alarm tone all thru the place
or even just a door or any contact to a device you need to let every one know needs immediate attention. there is also an emergency whoop tone alert for use to evacuate the plant if theirs a fire ,tornado etc. all in all a simple solution to what is usually a mess of wires and devices.
Viking even makes a device you can add to existing paging unit to provide mass evacuation tones and voice commands . how ever you will want to make sure the device and paging system has some type of back up power like a UPS
No comments:
Post a Comment