more more stuff

MASS MURDERER’S ARE COWARD’S and LOSER’S !!

With the recent rise in random  Mass Murder  Sprees the anarchist feels it is time to

Get to the root of what is causing these individuals to Pick up a gun and start shooting.

If they think there making a statement it is only that they are COWARD’S and LOSER’S.

A Real Man does not pick up a gun walk into an office or Public Place and start shooting.

What a Real man does is confront Man to Man the person or persons who are bothering them, and if he can not  confront them . Then he knows it is time to get out of the Kitchen

And then expose the fools for what they are. The Ink Pen is mightier than any Sword or Gun .And revenge is Sweet when done with the proper embarrassing twist.

After all When the anarchist gets revenge it is at a far distance,and the person receiving it knows exactly were it came from but can never prove it. That’s the bittersweet twist the anarchist loves about his revenge. Thus the words “Reach out and Touch some one”

Might come to mind.

However with these Murderers there is something very deep rooted going on. Something Is very wrong inside there brains .There form of revenge is to Kill , Killing is wrong and forbidden by God ,but these Killers seem completely empty of Gods Presence .It is like they are  Programmed Robot’s that something has gone wrong in.

Some blame the Government for using mind control to set off these Killers yet others Blame Alien life forms .Still others believe that in many cases it is the medicines they take and counseling they receive for there mental illness that is setting them off. But The Anarchist believes these killers are getting their Commands from some one else some one Evil .

And that is Satan him self, I believe these Individuals are part of the End times that have been predicted to come they are the first warning  of what is to come.

God could not have created such a man that would do such horrible things. Look into the eye’s of these killers after they have been arrested . What do you see nothing more than a

Blank cold maniac stare . There’s no emotion theirs no body home .Look into the Eyes of Richard Baumhammers, Ronald Taylor ,Timothy McViegh  ,and the latest Coward Michael McDermott  all Cowards all Loser’s ,Who want to blame everyone but themselves for there problems.

The latest Coward and Loser, it is believed was mad at his employers, because they were going to garnish his wages to pay back IRS Taxes . No one likes paying taxes ,but the Lord said “ Give to Caesar what is Caesar’s “ His employer even held off till after the holidays for him so how did he reward his employer . He shot 7 innocent Coworkers dead .

No Normal god fearing person would have done this he would have either arranged to pay his back taxes or disputed his taxes through the courts.

A normal Person does not Blow up a federal building when mad at his government he uses the laws and the courts to make things Right.

This is why I believe these men are under Satan’s control and the only way to stop it is to hold onto our faiths, and pray for those individuals to weak to avoid Satan’s grip.

Believe it or not

A LOW VOLTAGE DOOR BELL CAN CAUSE A FIRE?

Submitted By: Nick Markowitz Jr.

Fire Investigator

Of all the things one would not think would be responsible for the cause of electrical based fires

the plain old Door bell would be on that list but this is but a myth , especially in older homes

with Knob and Tube type wiring.

Door bells originally existed in homes well before electric power wiring was ever introduced into homes.  electric door bells were around when homes were lighted with natural gas ,it was a very simple system which used dry cell batteries and a bell that was 3-6 volts ac/dc and a simple button.

and small guage cloth covered wire

However as Electrical power become available to the home owner the battery powered door bells were then switched to Alternating current thru means of a small step down transformer

which was either attached directly to the basement studs or put within a metal box with hinged lid. along with the transformer was a small Porcelain fuse block with 2 screw in type fuses that were same size used in the house fuse panel and this is were things started off on the wrong foot.

Unlike today’s modern doorbells which have built-in self restoring thermal breakers

the original door bell transformers had to have a separate fuse in each high voltage leg of 1-2 amps. But typically what would happen is the cloth wiring to the door bell would disintegrate

The wires would short together and one of several things happened. The transformer fuse would blowout or the door bell would latch on and stay on till short was removed or fuse blows.

but instead of most home owners or handymen replacing the fuse with the correct size typically they would grab a fuse the used in the main box which would way overload the door bell transformer system and then when the next time the wires would short out ,the bell would latch on and stay on to the point that the transformer gets so hot it would ignite the wooden timber to which it was attached.

Alas most investigators would blame the fire on the high voltage wiring along the beam, because usually the transformer completely disintegrates in the fire .If not mounted in a box.

This again is one of the reasons why point of origin in electrical fires can throw investigators off course and why Electrical fires are so hard to investigate.

Now just because your in a modern house with modern transformer does not let you off the hook from a door bell fire several situations can still and have caused fires.

one is a thermal overload in a modern transformer failing to operate as designed .

the other is the dangerous practice of not grounding the transformer and using open splice wiring

instead of wiring the transformer thru a box knockout.

many times I find transformers wired with out a box on modern wiring which is illegal by code

but homeowners see the mounting feet on the transformer and figure they don't need a box which is a dangerous practice the mounting feet are  strictly for using the transformer on old style Knob and tube wiring. of course all transformers I have seen have proper wiring and installation instructions but who needs instructions??

Geez why do I need to file permits and get training and follow the National Electrical Code

It is only Low voltage wiring

Submitted By: Nick Markowitz Jr.

Electrical Contractor.

Once again I have had to break off from doing subcontract electrical or Security/Fire systems work because the company I was doing work for does not want to comply with building code laws.

It seems like an Industry wide practice because only 12/24 volts Dc or AC wiring is involved with, there is no need to get involved with Following codes the answer is They are Dead wrong.

It is exactly this lazy attitude which puts life's at risk and your as a Firefighter at risk every time you step into a burning structure.

All low voltage wiring comes under the statutes of the NFPA National Electrical code

and it is Specifically listed under class types of 1 , 2 and 3 in Article 725

and 800 etc plus it comes under many other areas of various codes.

Unfortunately if you took a poll of company's who do low voltage wiring you would find less than 30% even now there suppose to follow NEC and other codes and unfortunately there work shows every time one of there installers drills a gas pipe or electric wire or runs the wrong wire

with its flammable jacket which can put off highly toxic fumes that have been run in duct work  or runs wiring incorrectly around explosive atmospheres or tries playing Electrician.And studies of the low voltage industry's  ( Cable,Phone,Alarm )shows that education of installers is sorely lacking. In fact you may be surprised how many are not even High School Graduates.

The last Company I was working for had a Commercial Sales Rep out there specing out Fire Alarm

Systems with absolutely no Idea what the codes are what permits, plan filing etc or what had to be used.

and when I submitted the bill for all the stuff she forgot to figure in the bid I had to install so it would meet code I got nothing but grief.

Seems many of these company's have no Idea the amount of liability they leave them selves open to when they do there work. In Particular the Alarm Industry thinks it has shielded it self from liabilities by making customers sign an Exculpatory Clause in there contracts(check your own alarm contract its in there) that they can not be sued even if they Gross negligently install the alarm . and so far for the most part Courts around the country have allowed these clauses to stand.A very large mistake in my opinion , I have been at industry events and heard Alarm company's brag how there suit protected.

just imagine any other industry or business that you can charge a customer for thousands of dollars in product put it in  gross negligently and then not be held accountable for it.When it fails

I do not require my customers to sign an exculpatory clause but then again I try my best to put all my Integrity into designing and installing there alarm correctly in the first place. But many Company's figure since they are covered under the exculpatory clause they can and do get away with any thing they please.Of course  they think I am crazy because I still do alarm Deals on a gentleman's Hand Shake.

 .This even goes as far as required permits they feel it is the customers responsibility to make sure there are permits issued not the Alarm company's.Of course some company's gambled and lost it is now to the point in the industry that small company's like my self can not get or afford Errors and Omissions or Completed Operations insurance because so many large judgements have been won against alarm company's. and it is getting this way with general liability insurance also.In my previous articles I have pointed out all the wrong things being done by Installers and in Pennsylvania alone there are many major suits being launched against Alarm company's the latest to come about is a 2,000,000.00 dollar suit against a large national company  in York  pa.

a couple lost there home even though they put in a sophisticated fire/Security system .A Fire started and even when the wife hit the manual alarm buttons the fire alarm had failed to operate.

While working for this last Alarm company Often times I would call the 911 center to warn them

that we were doing a hot test of the fire alarm to make sure the central station was doing its job

and the 911 center never got the call and if they did it was 15-20 minutes before the central station called 911 .I reported this problem thru proper channels and nothing was done

and afterwards I started notifying the alarm Owners and Fire marshals to the problem hoping

enough preasure would be put on this company to change there practices.

And once again Im preaching to the choir.

               VII.
                            Electrical Safety:
                       Using Electric heating Cables


By Nick Markowitz

  Now that its cold again and old man winter has decided to ice things up,
its time once again to install and turn on electrically-powered heating
cables to de-ice all our favorite winter trouble spots. But before you
decide to plug them in, there are a few steps that you should take to
prevent the many hazards associated with mixing electric and water.

  #1: Are your cables UL-Listed and approved for the job, especially if
      they are being used outside. U.L Listing insures that the cable you
      use has gone through extensive fire tests and that it is properly
      designed to for outside use in a wet environment. A U.L. Listing also
      assures that the cable you use won't deteriorate and short out
      later.
     
  #2: Are you using the correct cable for the job? Heating cables are
      usually designed for specific tasks. Some are designed to be used on
      roofs while others on pipes. So care must be taken to assure that the
      heating cable that you use is applied to the right application.
     
  #3: If your heating cable utilizes a three-prong, grounded plug, is it
      plugged into a properly-grounded receptacle?  This is important
      because some cables use a metal strip which, if the insulation fails,
      will allow the hot wire inside the cable to come into contact with
      the outside environment. The ground prong removes these harmful
      currents and enables the fuse or breaker that provides power to the
      circuit to immediately trip.
     
  #4: If you are using heating cables outside, are they plugged into a
      GFCI (ground-fault circuit interupter)?  GFCIs provide additional
      electrical protection. It's also a good idea to use then on the
      inside of your home as well (NEC, 1996 Edition requires use of 
      GFCIs on all resistance heating element branch circuits supplying
      electric heating equipment). 

      GFCIs operate by comparing the amount of current flowing through the
      hot wire in the heating cable or power cord to the amount of current
      flowing through the neutral wire. If there's an imbalance between the
      two values, the GFCI trips the circuit breaker, de-energizing the
      electrical circuit. This can occur when a heating cable or power cord
      becomes cracked and moisture in the environment causes current to
      leak from the hot side of the power circuit to earth ground.

  #5: If plugging in an existing cable, always visually check for cracks,
      tears, and cracks in the insulation.  It may be necessary for you to
      replace the cable if you find any. This will prevent moisture from
      penetrating the cable sheath and shorting out the wire.

  #6: Be sure you have the correct voltage cable and that the outlet you
      use will not be over loaded.

  #7: If the cable you are using is intended for heating pipes, have you
      checked the automatic thermostat for proper operation? This will
      save you money if the thermostat is not operating properly. It will
      also prevent problems later when the weather turns colder and the
      cord is left plugged into a receptacle.
     
  #8: Is the heat cable properly attached to pipe per the manufacture's
      instructions?  This will save electricity and enhance fire safety by
      assuring that the thermostat reads the ambient temperature properly.

  #9: When installing a heat cable, make sure the cord does not double over
      itself. This will prevent it from burning through the insulation of
      the wire that provides it with power.

  #10: When installing heat cable inside roof gutters, be sure it's listed
      by U.L. for this purpose.  While you're at it, make sure there are
      no sharp metal edges in the gutters and downspouts that might
      penetrate the cable insulation.  This can cause a fire or even a
      deadly electrical shock.

  #11: Never use extension cords with heating cables. This is because using
      an undersized extension cord can cause the conductors within it to
      heat up and melt the insulation. This will then cause the wires
      within the cord to short out and possibly cause a fire.
     
  By following these and other good safety practices you can safely use
heating cables and remove ice safely also a reminder to those fortunate
enough to have side walk and drive way heaters installed with in the cement
if you have the older style high voltage type 120/240 vac grids installed
in your walks and drives make sure to have a ground fault breaker installed
to prevent problems and if any wearing of supply wires or cracks in cement
happen discontinue there use and permanently disconnect them and replace
with low voltage models 12/48 vac

                 --------------------**--------------------

EVEN WITH ALL THE ADVANCEMENTS MADE IN CIRCUIT BREAKER TECHNOLOGY

A FUSE IS STILL SAFER?

Submitted By: Nick Markowitz Jr.

Fire Investigator

Yes the lowly Fuse is still superior to Circuit Breakers simple in design it melts it self-open when there is an overload or short circuit and that’s the end of the story.

In fact fuses are still required to be used in the National Electrical Code for such items as

Large Motors and other pieces of equipment that have a large short circuit capability

Why you might ask because

Fuses and breakers are rated 3 ways   the first is running amps of the circuit the second a fuse is fast acting or timed delayed to allow high draw devices like motors to start up and third and even more important rating is the short circuit amps, this is the amount of amperage

Available when a particular device short circuits. Even a typical simple house circuit when it short circuits, it has been estimated produces enough energy to light 100 houses for a year in the split second the electrical short circuit is produced. This high- energy flash

Is what is responsible for hundreds of deadly accidents each year and many serious and fatal burns? Individuals suffer from what are known as thermal blasts, which sear the skin .These blasts are measured in Calorie units because they are so high in power.

The average residential breaker is 15/20 amps and has a short circuit rating of 10,000

Amps. Were the typical short circuit power you will find is 6000 amps or less. Were you can find Commercial 15/20 amp breakers with ratings up to 45,000 and fuses up to 300,000 short circuit interrupting amps.

 If you improperly design an Residential , industrial or commercial circuit and put in the wrong amount of short circuit protection the fuse or circuit breaker will be destroyed, as it cannot handle the high short circuit amperage. Even if the main fuse rating is correct.

I have seen many times were a fuse will blow in a business and the store owner hires some handyman to come out and correct the situation the handy man pulls out the fuse on a very large Air-conditioning unit which is marked for fuses only and he finds a 60 amp fuse no problem he goes down to the local hardware and gets an of the shelf fuse which is usually only rated at 7000 amps when he should have bought a time delayed fuse with 100,000 amp protection often referred to as a type R fuse.

He puts the off the shelf fuse in starts the unit up and wham there’s a violent arc of light and the handyman is severely burned.

Now had the Air conditioning company done its job correctly when they installed the required fuse disconnect they should have installed the extra kit into the case which only allows Class R fuses as they should have known the potential for damage with an under rated fuse but of course they did not and we have an explosion. Another big problem we are seeing in this country with equipment is that many machines etc. now use European motor starters and relays designed to IEC standards, which call for no damage when an overload occurs and require a class J, fuse not an R, which will cause great damage to equipment. Compared to NEMA standards, which allow for limited damage to components and specifically call for Class R fuses. NEMA equipment is built to withstand limited damage, as IEC is not. Still another problem is when people try to bring home a motor or machine  like a lathe from a shop and try to run it of residential power.

Many times again the wrong fuse or breaker is used and when the machine malfunctions it can be deadly.

As you can see electrical circuits can be extremely complicated to design and even more frustrating to investigate. This is why it is crucial that any one investigating fires have a complete knowledge of electrical systems before trying to just pass the buck and say faulty wiring caused the problem. Any one can guess faulty electric caused the fire it is another to get into a court and have to prove it. Yes electric is often to blame but it should

Based on solid science not guesses.

EVERY DAY IN WESTERN PA.

THOUSANDS OF HIGH TECH WELL PAYING JOBS GO UNFILLED

THE WHY WILL DISGUST YOU?

You see the above statement holds true not just for W.Pa but also in any big Rust Belt closed down steel town.

Who is responsible mainly it is the Democratic Administrations and the Unions plus you can throw in some Real Estate speculators as well.

But the biggest culprit is Joe 6 Pack

Who is Joe 6 Pack?

He is a mythical but very real individual who lives with in these rust belt towns. He is the steel worker or

Other hard working factory worker who went to work every day gave it his all and at the end of his shift

Went to the local bar and downed a few beers and shots of whiskey with his friends. He raised a family

 Voted straight democratic because of those terrible republicans and is a voracious sports fan.

But of course that’s the myth

 You see Joe 6 Pack was nothing more in many cases than a lazy un-educated stupid follower.

He worked a 40 hour week 20 of which he actually worked counting paid breaks and lunch and times he went home early on Fridays or came in late Mondays and never ever ask him to ever do anything more than the absolute minimum

At his job. He never questioned what he did or why he did it. He believes everything his union leaders told him and everything the Democrats tell him. He likes his life because it is all planned out for him he makes the perfect little communist.

But when Joe 6 Pack lost his overpaid Union Job for ever he still thinks that some day the mill will come back his union cronies tell him so, This is why Joe failed to get job training for a job that pays less that is why Joe stayed on unemployment high-tech or any work was beneath him if it did not pay what his steel mill job paid.

And of course Joe will not go back to school because he has been told and has accepted that he is stupid

And will never be able to better him self. Just like I said the perfect little socialist commie. And the Union Cronies put up road blocks to companies wanting to come into the area, threatening them if they do not agree to all there ridiculous demands.

So now that the steel mills are gone you have all of this property now available, which after it is cleaned up

Has become attractive to high tech companies, and small to medium manufacturers.

Of course some communities have opened their arms and bent over back wards to get these companies to come others have not.  Other communities have put every roadblock they can to keep businesses out especially if they’re foreign owned. You just have to look at Braddock Pa. to see the continual discrimination that goes on every time a minority business wants to set up.

Then you have the Real Estate Developers who deliberately buy up and leave certain towns and property’s to keep them derelict so that they can steer buyers to there more choice property’s and of course if Joe 6 Pack gets any Ideas of complaining an Arsonist in a community has a way of shutting them up.

You can see this all over the place were one town has a big new shopping complex the old part of town has been deliberately neglected on the other side of the tracks and building and code enforcement officials do nothing but throw up obstacles, when some one wants to fix up an old property.

But then after an employer manages to get past all the obstacles and tries to go out and get skilled workers in these towns he often has to go outside the area to fill them because too many of the Joe 6 packs will not take the jobs as they have it good and do not want to get training.

So an employer comes to find out the whole myth about a skilled hard working work force has been nothing but a lie he closes up shop and moves to a more business friendly climate and Joe 6 pack and all the cronies who control his life do nothing but cry to the government and raise taxes because they can not get any help or good paying jobs.  Pittsburgh, Youngstown, Reading, and Allentown they’re all the same.

As long as you have narrow minded Neanderthal politicians and all their cronies these towns and cities will continue to be the shit pits they have become.

Fire works and Common Sense

Some times the 2 do not go together

By Nick Markowitz Jr.

Fire Investigator

I was recently on my way back home from the Radio station were I was doing some Engineering tests when we decided to stop along the way at a bargain store. Walking thru the Bargain Store in Westmoreland County along Pa. Route 380 with a friend who helps at the station who is also a volunteer fireman when we came across a very large amount of displayed Pa. Legal fireworks, Party Popper’s, Sparklers smoke balls etc. aprox. 55 large cardboard cases worth.

The problem was that first the building is combustible construction  with no sprinklers and this particular area that was set up was the connection point of 3 buildings, which also served as an exit way for all three structures. Additionally in the building next store were over 500 gallons of paint and other combustible chemicals including small tires for mowers etc.

I mentioned to the proprietor it was not such a good idea storing that many fireworks out in the open and the exit blocked and I was told to mind my own business .He fully complied with the codes in the area.

Wrong thing to say to me I immediately went to nearest fire/medic station and filed a compliant with the local fire chief since it was a Saturday and the code enforcement officer was not available. He said he would look into the situation I called the Code Officer on that Monday to be told he was never informed and to leave a full complaint on the other inspectors voice mail obviously he could not be concerned.

I went back on Wednesday to still find all the items on display a large fire burning outside the back of the building where they were discarding of old boxes etc which was putting embers into the air. and only part of the lights were on they were running the store by gasoline generator with no emergency back up lights available as they had already been exhausted the place went black for a minute while I was in the store luckily I always carry a mini mag so I was able to see were I was going. I once again called the code enforcement officers and was ignored and I promptly filed a complaint with Labor and industry because the inspectors were not doing their job. Luckily no one got hurt because of those who could care less about public safety including the store owner and code enforcement officers But in the late 90’s in south  eastern Ohio a mentally impaired young man walked into a crowded store full of fire works lit one off and placed it into the other fire works as a result 9 people were dead and scores seriously burned and injured this exact scenario could have just as easily been played out at this store .As a result of that disaster many codes have been updated all over the country . Pa.  UCC Codes require fire works being sold in businesses to be in a display case were a clerk has to hand them to a customer who is of legal age 18 to buy them. No smoking signs must be posted and a water-based extinghuisher must be near by the display. Any excess fireworks must either be stored in a fully sprinkled warehouse type building or stored outside the building and secured.

None of which the above store was doing and was clearly pointed out to the code enforcement officer.  Meanwhile  later that evening after dropping off my friend and running a service call to a customer . While I was on my way home there was a merchant selling fireworks out of the back of a large rental truck in a parking lot of a small shopping center. The truck was in Penn Hills where I know the Fire Marshal had sent notice out to all fire stations and police about fireworks policies. I called the Fire Marshal on his cell phone which I was lucky enough to have the number for and explained the situation to him he asked me to stand by incase they moved from area so I could give him details. So while waiting for The Fire Marshal to arrive I walked into the local ice cream store next door for an ice cream cone since it was a hot July Saturday evening  and behind the counter were even more fire works they were selling.

Mr. Mason arrived several minutes later and in a professional manor had the businessman shut down his sales outside and on the side walk and sell only from inside the variety store he owns in the center which had secured the proper permits and was following codes and precautions. He then walked over to the ice cream store advised them of the law and had them remove the fireworks from there store which they returned to the gentleman selling them in the parking lot. Talk about all in the family.

Case was closed and no one was hurt. That same weekend I heard thru the great vine Pittsburgh Fireworks Task force had taken down several illegal vendors as well were fire works are extremely restricted. To party poppers and toy gun caps your not even allowed sparklers.

So one community does it right the other does not how would you like to have been shopping in a store with boxes of fireworks illegally displayed so any one could walk in flick a match or cigarette in a box and destroy the store with you in it.

Fireworks can be a safe and fun way to celebrate but it has to be done so properly

If you are a fireman and observe illegal fireworks sales or storage activities notify your chief officer and demand code enforcement or your chief who has the authority to have them removed with help of the police. If they will do nothing notify your county or state Police Fire Marshals Unit.

You just might help prevent the next big unintended fireworks disaster.

Games employees were playing with

High-pressure water hoses

Could lead to serious danger’s

By: Nick Markowitz Jr.

Fire Investigator / Electrical Contractor

One of my customers is a large Meat Packing facility were every night after the shift has ended for the day employees come in and use high- pressure water hoses to sanitize the entire plant. In this type of atmosphere it requires that all equipment be watertight

To withstand accidental wash down.

Accidental being the keyword.

Unfortunately in this plant some knuckleheads thought it would be funny to hose down the pull stations horn/strobes Voice Evac Horns etc. to make the Fire Alarm go off.

So they would be paid while waiting to go back to work. 

And in the process they have destroyed numerous pieces of equipment over the years putting them and their fellow employees in serious jeopardy if there was an emergency

In the plant were employees needed to be evacuated due to a Fire a massive Freon, Ammonia or CO2 leak Boiler explosion etc.

The workers are unionized so they go about with impunity doing damage because the union always will always get them out of trouble or so they think.

After several people have been demoted and or fired it seems the Knuckle –Heads have not learned.

So it was time to get tough when employees will not comply with orders in the case of Fire Alarms being damaged I made it clear to the employees that they could be arrested and have Felony Charges of Risking a Catastrophe Filed against them which means they could never again work in the plant as federal laws for meat packing plants forbids hiring felons Additionally they could now face Federal charges as well under the Patriot Act

 Of the Federal home land Defense Department. Because Meat Packing plants, water treatment and various utility sites Radio and TV stations etc all come under the act as essential businesses and particularly Meat packing plants with the chance of terrorists trying to tamper with products.

When a US Marshal comes in and arrests one of them the games will be over.

But we will see just how far the clowns are going to push their luck.

At this point the plant is considering Undercover operations to ferret out who is doing what and having them removed. But Tampering with alarm equipment just does not go on in this plant it is a rampant problem all over and until Criminal enforcement is meaningfully applied it is going to keep gong on. Whatever perverse fun those who would vandalize life safety equipment get it is a serious problem that needs to be stopped permanently. In these days with all the warnings and scares with terrorism after 9-11 we do not need

These types of clowns in society and prison is were they belong.

Having problems with clowns in your jurisdiction then work closely with the AHJ and police in your community and start cracking down after a couple of people get busted the word will spread like wild fire.

 Editors note I did not write this sent from unknown individual  i meet many years ago but never knew his name

THE FRIDAY THE 13TH ANARCHIST REPORT

UNDERCOVER:

THE GAY AGENDA

The Anarchists Grandfather a Anarchist in his own right often said about fagots line them up against the wall and shoot them.

While I have never taken such views so strongly I have basically felt when it came to working with gay men and women don't tell ,don't touch  don't bother me I will not bother you.

How ever I got the eye opening experience several weeks ago when I was asked by a  strange but harmless friend of mine  to help him set up his fetish booth at an event called Pennsylvania Mr.Drummer and Drummer boy .He needed his lighting and phone line for fax installed and security for his booth.

Now my friend sells all this fantasy leather and rubber clothing along with paddles ,whips harness's restraints etc to help couples live out there erotic sexual fantasy's.

how ever on this particular evening the Leather bar in Pittsburgh was packed with Gay guys and Gals. and they were wearing every type of disgusting leather  outfit you could think of with ass cheeks hanging out along with genitals along with T shirts

with disgusting terrible messages.and leather cop and security guard outfits and Lesbians dressed as Boyscout s and diesel dykes dressed in jeans and t shirts with there cigarettes rolled up in there sleeves they looked like guys from the rear. and Sin and Debauchery everywhere

and  before during and after the event guys kissing each other and hugging and feeling each others genitals.

Needless to say when I got home i took my clothes off and burned them and took a long hot soapy shower.

After seeing what I saw i will never ever again were a leather jacket.

Now none of the guys or gals made a pass at me as they new the vendors were straight.

I never did get the meaning behind what drummer stands for but it has something to do with Leather

The program started off with a transvestite in a red, white and blue dress  singing the national anthem while an American Flag was unfurled unlike the gay guys only us straight guys took off our hats and put our hands over our hearts .gay event or not they were respecting the flag.

and all in the audience should have also done so. guess they don't know how lucky they are they can live the gay lifestyle in this country recently in Iran 6 gay cross dressers were ordered to receive 200 lashes each and 20 years in prison for moral turpitude.

After the flag display they introduced the judging panel which were former and current drummer winners all dressed in leather along with a gay women known as the tally mistress for the event.

then the 3 Drummer boys and 3 Drummer men were introduced each giving statements as to why they wanted to be a drummer.

The Drummer boys who looked to be under 24  refer to the older drummers a there Daddy's who they often live with and there daddy's help introduce them into the gay leather lifestyle.

mean while, while I was providing security at my friends booth  a gay male couple were ogling over all the display items. the slave in the relationship took off his leather vest to reveal a leather harness which went all the way down and around his genitals. his master struck him with several different whips on display until they decided on one both master and slave liked. they then kissed and embraced each other as my friend ran there Visa Card.

I was about ready to go outside and puke.

next in the concert each Drummer contestant came out with something to auction to the crowd the proceeds going to the gay and lesbian task force. Drummer boy 1 had a basket filled with paddles and whips and a video "Dungeon Slave Boy" number 2#  auctioned off a Ball stretcher and Cock ring which he was wearing and was visible to the crowd the cock ring was a 2" metal ring that went around the genitals that attached to the ball stretcher that went around the testicles and hung down on them. quite painful it appeared . the winning bidder got to come up on stage and remove the items from the boy. Disgusting. how this place keeps its liquor license I would like to know any were else in Pa. it would have been revoked the club raided busted and shut down. the 3rd boy a young black male had on a studded leather belt to auction again the high bidder got to come up on stage and remove it then the usual hug and kiss.

The men came out next Drummer one auctioned off a full leather harness again the bidder got to take it off. drummer 2# had on a leather thong that was taken off on stage along with drummer 3#

Then some entertainment several different lesbians came out on stage dressed like  Cher

lip sinking her songs actually they were very good entertainers.

Next the most disgusting part of the contest the drummers had to act out on stage there most erotic leather fantasy's

boy 1# fantasized about being abducted and tied in a dungeon and having his genitals tortured

all carried out onstage ( at this point i could look no more I went out to the lot were it was being broadcast over speakers. )

Boy 2 #fantasizes about being abducted by 2 gay guys and has a threesome on stage. boy 3#

has a fantasy about breaking into a sacred temple and is whipped and beaten as he attempts to claim the treasure.

then come the drummer men, Drummer man1# fantasies about being a cop dressed all in leather cop outfit  in the bad side of town he is patrolling Hells Alley east when he comes across a greasy

Politician he busts playing 3 card Monty he rolls the guy to the ground and proceeds to rape and sodomize him on stage to teach him a lesson never to come back to the alley. man2# fantasies of finding a leather boy and gagging and tying him to his Harley and again a rape scenario.

I left the lot to go puke. I will not even describe contestant 3#

My friend tells me they then had all the contestants come out in Leather jock straps and harnesses to show off there body's and butts.

after the judges Talley there votes and the awards were given out a Dungeon Party was held all night in the lower bar section with everything you would expect to find in a dungeon I was told.

The gays don't have an agenda , and are all well meaning citizens who wouldn't hurt no one.

RIGHT?

And to make matters worse the whole time this contest is going on 2 City of Pittsburgh cops off duty but working in Uniform are with in sight and sound of the whole thing.

WHY WE NEED TO BE KEEPING A CLOSER EYE ON GROUP HOME INSPECTIONS

A CASE STUDY WHEN A STATE MENTAL INSTITUTION

IS FORCED TO CLOSE

Submitted By: Nick Markowitz

In southwest Pennsylvania there has been a State Institution  for Severely Mentally retarded Youths known as Western Center . As much as I do not like seeing people institutionalized

I feel the current situation in this end of the state will ultimately result in needless injury and deaths

of patients who thru a Lawsuit filed by a Disabilities Rights group is closing Western center after

alleging abuse went on there.

But the group home alternative there giving these patients is the wrong thing to do.

And as usual Im right in the middle of the whole thing.

So heres my story.

I was hired as a sub contractor by a local alarm company who is a dealer for one of the country's largest

Fire and security Company's

As such I expected this job to go off with out a hitch with no problems to worry about.

was I wrong.

The first day I arrive at this residence in a wealthy Washington County suburb  which is to be converted to a group home to Install

a Commercial fire Alarm and Emergency and exit lighting

I am met by a home employee who advises me that do to hostility by the neighbor's to keep a low profile .and keep all doors locked.

I ask all permits etc. have been filed for this work and i am told no .

I call the contractor i am working for and he advises me the company running the group home has signed a letter stating they would get all required permits

I proceed with the job  and 2 hours into the job my helper receives a head wound off of a improperly installed light fixture which one of the group home employees did not put the edge guards on to stop this exact kind of accident when he went to go up in the ceiling to fish wires my helper will

require 10 stitches at the local hospital I call 911 an ambulance is dispatched who stops the bleeding enough I can take my helper to the hospital.

I call the contractor i am working for to advise of the accident and get chastised for calling for the ambulance. Too Bad I tell him its my call as a Fireman with advanced First aid training I will not play around with a head injury .

The next 2 days I work by myself and On the 3rd day my helper comes back after starting the job I realize the plans as drawn by the designer are flawed and I make several changes to bring the system to code it is when we start to hook the fire panel into the house wiring system that the

problems with wiring in the house start to rear there head although the original house wiring was correct the previous home owner did everything you could do wrong with wiring

and the group home operator installed a suspended ceiling in the basement in the home to cover up all the violations when I inform them as to the violations I am told they are existing and will not be corrected. I advise them they have to be corrected again I get grief.

I Finnish my work again I ask were the permits are again they have not been filed for.and i am told they wont be.At this point I have the responsibility as a professional electrician and as required by state law to notify the township code enforcement as to whats going on in this group home . they upon hearing from me are shocked to find out what has been going on here.

all the work done at the home was never applied for the township  demands violations be corrected and permits filed.

and at this point I no longer sub contract for this alarm contractor.I will not work with contractors trying to pull shady deals. It ends up I started getting phone calls from parents of children who

are going into these homes after the whole thing made the local papers and I will be testifying at hearings being held to stop the shifting of these children to less than reliable group homes.

I question the whole group home setup in the first place.

for the following reasons.

 At western center there was a staff doctor and nurses on duty at all times, aides assisting children were highly trained well paid professionals who can handle a violent youth episode and a hospital is 5 minutes away and western center is well constructed and fire resistant

group homes use untrained staff .are located 20-30 minutes from a hospital are not well constructed like western center , what if one of the patients gets violent or starts starts choking

the 2 staffers on duty are unlikely to handle the situation properly or could be outnumbered

or attacked  to the point Police intervention will be needed . also there are not the precautions

taken to prevent runaway patients as they have at western center.

I agree group homes serve a purpose but not in this situation.

High  Risk Money Handling Business protected by an alarm system

Not worth 3 cents ?

By Nick Markowitz Jr.

I due work occasionally for a national servicing alarm company and I recently did a conversion system for them at a store which handles large amounts of  cash in a  run down area of Pittsburgh.

What I expected to find from the previous security system was a well installed system similar to what you would find in a bank.

I arrived and after clearing the security doors etc I was shown the Burglar alarm system

Which at first glance although it was older looked fairly formidable. It was installed by

A Pittsburgh  Based  company which now also offers national account services for big box chains.

A Radionics 8112D panel a grade A - Ademco Bell and a Potter Safe Unit all in conduit as required by UL  But that’s were the protection stopped.

I opened the panel up by taking 2 screws out there was no required key lock and no tamper switches or sheet metal attack switch as would be required on a high security install. Then I found batteries which were last serviced in 1995 and its 2005 they are 5 years past what they should have been for servicing and this is what was causing the false alarm every time power went out as none of the batteries including the main panel the aux Altronix power supply nor the Potter unit had current fresh batteries.

Then to make matters worse all of the  end of line resistors were in the panel and not out side protecting the wiring.

This means there was no protection against shorting any of the wires including the grade A bell which is specifically designed to detect a shorted liner attack if some one drills into it. There was also no motion protecting the equiptment. As well.

Then to make matters worse the wireless linear panic pendant the manager wears around her neck would never had worked because the installer put the receiver inside a metal can.

Something Linear clearly says in there instructions not to do.

Then when I went to take the Potter safe unit apart I found that the wire from the control unit to the safe was not in flexible conduit or of the type which has a grounded shield in it that detects a ground or short.

The only thing going which would save this install from a burglary attack was the Derived channel  supervised connection. And any simple maneuver by a burglar could have defeated the system and no signal would have been sent unless the burglar cut the phone lines first .Then while talking with the manager while she was on a break  she said how clean and professional my work was and how the other companys technicians were a bunch of ignorant slobs who never cleaned up after them selves and treated them very rudely and like they were stupid.

Unfortunately this is a case of Ghetto alarm install and service work the stores in the ghettos so any thing goes and no one gives a damm about any one.

This is a very bad and racist attitude any installer gives when they work in run down area and do not treat there customers with professional service and dignity .But all to often I hear it and see it from installers, and if this is how they treat one of there national accounts how are they treating every one else. Then again that’s probably why they lost the contract for service with this national  chain of stores.